Contact Us:

Buxoplas Manufacturing Limited, Quarters Farm, Hazlebadge, Bradwell, Hope Valley, Derbyshire, United Kingdom, S33 9HX

sales@buxoplas.co.uk

Tel: +44 (0) 1433 620 175

Fax: +44 (0) 1433 620 047

Semi Rigid Nylon Tube PA12

Buxoplas’ Semi Rigid Nylon tube is supplied in a range of up to 11 colours, and natural (opaque). We use a high viscosity extrusion grade of Polyamide 12. Our Semi Rigid Nylon has a good chemical resistance, a good resistance to weathering, and significantly lower water absorption than polyamide 6. The recommended operating temperatures for Semi Rigid Nylon are between -40˚C and +110˚C constant and up to +140˚C intermittent. Working pressures and burst pressures for each size are given in the product list in BAR and PSI.

Our Semi Rigid Nylon tubing is made from a material that is Water Regulations Advisory Scheme (WRAS) approved and is therefore suitable for beverage transfer.

All the un plasticised PA12/Type 12 Nylon Tubing that we manufacture is produced from raw material and by process and quality control systems which meet with the dimensional (metric sizes only) requirements of the following:-

  • DIN 74324        
  • DIN 73378 in accordance with the ISO 9001:2000 Quality Management System.

We stock a comprehensive range of Semi Rigid Nylon Tube PA12 from 1.5mm id to 28mm od in metric sizes and .062” id to 5/8” od in imperial sizes. The current stock guide on our product list outlines what we aim to consistently keep in stock and would normally be available for you immediately.

There is no minimum order charge. No extra cost for colours unless agreed.

For specific chemical resistance information and technical assistance please contact us on 01433 620 175.

Any text can be printed on our tubing with an added cost of £0.005 per metre with a minimum order length of 500 metres.

Many other colours available. See: CLARIENT COLOUR CHART

 

For Semi Rigid Nylon Product List see next page: